Beijing cleaning - land reclamation cleaning
（1） Tools used:
Large dust suction machine, multi-functional floor cleaner, glass set tools, extension rods, ladders, buckets, dusters, marble shovels, scrapers, water applicators, etc.
（2） Reagents used:
All purpose cleaner, glass cleaner, ceramic tile cleaner, ceramic cleaner, degumming agent, stain remover, acid cleaner, toilet cleaner, stainless steel cleaner, stainless steel brightener, furniture wax, etc.
（3） Beijing cleaning - land reclamation cleaning procedures:
Land reclamation is the first cleaning project. As construction projects often leave a lot of garbage and dirt, various ground stones, and cement paste blocks, paint, glass glue, water pollution, rust, etc. on the walls, all of which must be cleaned in the land reclamation work, it is the most difficult, complex and laborious work. The quality of land reclamation projects directly affects the quality and grade of future cleaning work, Therefore, it is very important to do a good job in opening up wasteland.
The procedure is as follows:
1. First, clean up the decoration waste left on the site;
2. Comprehensive dust collection from top to bottom;
3. Wiping the glass: first wipe the glass frame with a towel, then dip the diluted aqueous glass solution with a water applicator, and evenly smear the glass from top to bottom. If there is any stubborn stain, clean it with a scraper. Then repeat the above process, scrape it from top to bottom with a scraper, wipe the water marks left on the frame with a dry towel, and wipe the water marks on the glass with a machine skin.
4. Toilet: adhere to the principle from top to bottom, first recognize the material of the toilet top, PVC, aluminum-plastic plate or paint, and then clean it with different cleaning methods according to different materials; Clean the wall of the toilet with a cleaning ball or a board brush, focusing on the gap of the ceramic tile, and the glue marks, paint spots, cement stains, etc. left on the surface of the ceramic tile; Clean the sanitary ware in the bathroom with towels, and clean various faucets and pipe fittings with stainless steel cleaning solution; Finally clean the ground with the floor washer, which is the edge of the ground. Use the cleaning ball and blade to remove the dirt and cement stains on the corners that cannot be washed by the floor washer; Finally, wipe the faucet and other pipe fittings with a dry towel after inspection.
5. Kitchen: the procedure is the same as above. Note: since there are many stainless steel pipe fittings in the kitchen, it should be the focus of cleaning.
6. Bedroom and Hall: dust the walls with dusters or vacuum cleaners, and wipe the lamps, switch boxes, smoke exhaust devices, air conditioning outlets, exhaust outlets, etc.
7. Door and frame: distinguish the material of the door, dilute it with professional detergent, and wipe it with a towel. The procedure is also from top to bottom, fold the towel into a square, and wipe it from left to right from the top of the door. No omission is allowed. The places with glue stains can be treated with glue remover; The program of the box is the same as that of the door; We must ensure that there are no omissions and dead corners.
8. Cleaning of the ground: after all the cleaning is done, the ground is cleaned. The ground should also be divided into materials, such as wood floor, ceramic tile, or stone. When it is clear, it should be diluted with a special detergent and then cleaned. The glue stains on the ground can be removed with a blade, and the stubborn ones can be treated with degumming agent; After the last process is completed, the foreman shall conduct a comprehensive inspection and leave the site after confirming that there is no leftover.
9. Corner line: wipe it with a towel and remove all kinds of glue stains and paint spots with a blade.
2、 The difference between refined cleaning and reclamation cleaning:
As fine cleaning is another cleaning work based on land reclamation cleaning, it is different from land reclamation cleaning: land reclamation cleaning focuses on dealing with decoration relics
The left garbage, dust, glue marks, paint spots, etc., focus on the overall effect; Fine cleaning is not the case. It pays attention to details. After opening up wasteland and cleaning, it still
There will be some glue marks, paint spots and other stains, and some corners, door frame edges and window frame seams that are easy to be ignored.
3、 Standard:
Standard of glass: no water mark, hand print, stain and polish by visual inspection.
Standard of toilet: no color difference, obvious stains, paint spots, glue marks on the wall, clean and bright sanitary ware, clean stainless steel pipe fittings, and no dead corners, omissions and peculiar smell on the ground.
Kitchen standard: no color difference, obvious stains, paint spots, glue marks on the wall, stainless steel pipe fittings are clean, and the ground is free of dead corners and omissions.
Bedroom and hall standards: the walls are free of dust, the lamps are clean, the switch box is clean without glue stains, and the exhaust outlet and air conditioning outlet are free of dust and glue spots;
Standard for door and frame: no glue stain, no paint point, smooth and shiny to touch, and no dust on the door edge.
Ground standard: the wooden floor shall be free of glue stains and clean; Ceramic tiles are free of dust, paint spots, cement stains and luster; The stone is free of stains, glue spots and high gloss. |
